MarvinSketch does not automatically correct valence errors. Instead, they are highlighted by a red underline and you may make the appropriate corrections. This option can be turned on or off using the Edit > Preferences box.
In MarvinSketch, the charge of an atom is initially set to be neutral. As bonds are added or removed, MarvinSketch adjusts the number of implicit hydrogens to let the charge remain neutral. You may change the charge of any atom using the Atom Pop-up Menu. The number of implicit hydrogens will be adjusted, if possible, to accommodate the new charge. MarvinSketch will then perform a valence check and highlight the atom if an error is found.
MarvinSketch allows you to draw reactions in your molecule by placing a reaction arrow. You can place the reaction arrow in any position, pointing in any direction. The structures behind the arrow will be considered Reactants, structures along the arrow Agents, and structures in front of the arrow as Products.
MarvinSketch will determine if the reaction is chemically valid. The existence of reaction errors is denoted by a red box around the arrow. This option can be turned on or off using the Edit > Preferences box.
MarvinSketch allows you to set a map label on any atom in the molecule. Map labels are useful because they remain constant, unlike atom indexes, which can change as the molecule is altered. Atom mapping can be very useful when drawing reactions. It allows you to specify that specific reactant atoms will become specific product atoms. You can assign the same free map number to both of these atoms by pressing the Reaction Button on the toolbar, then drawing the arrow from the first atom to the second one. You can also select a Map for an atom from the Atom Pop-up Menu, or else you can use the Edit Pop-up Menu to automatically assign map numbers to selected atoms. You can also use the shortcuts M1, M2, ... to assign map labels, M0 to remove map labels, M= or M+ to assign unique map numbers.
MarvinSketch allows you to change an atom into one of its isotopes using the Atom Pop-up Menu.
By choosing View > Misc > E/Z Labels , you can toggle the display of absolute double bond stereoconfiguration labels. Bonds known to have an (E) or (Z) configuration will be marked as such.
MarvinSketch has a rich collection of features related to abbreviated groups.
A number of predefined S-groups are available in MarvinSketch. The complete set is listed under the Groups menu in the Periodic Table. These groups are also available as shortcuts. Select a group via the Groups menu or a shortcut, then move the mouse into the canvas and place the group by clicking on the desired location. If you would like to ungroup an S-group before placing it to the canvas, press the SHIFT button before you release the mouse on the desired location.
To create a new group, first draw the structure on the canvas. Then, select what you wish to include in the group and choose Edit > Groups > Create. A dialog box will appear, prompting you to name your new group.
User-defined groups are, by default, session-only. To retain a group for future use, add it to My Templates. This will also make the group available in the Groups menu or as a shortcut.
Link nodes enable specifying query stuctures contaning rings or chains of variable size. In the following example, the number of carbons can be between 1 and 7:
Group manipulation functions are available through the Edit
> Groups submenu and by right-clicking on an
existing group.
Choosing Contract
will contract a group to its abbreviation. To contract all
groups in the molecule, choose Edit
> Groups > Contract.
Choosing Expand
will display the full structure. To expand all groups in the
molecule, choose Edit
> Groups > Expand.
Selecting Ungroup
will remove all abbreviated groups from the molecule. The structures
will remain, but will no longer be associated with their
abbreviations. You will be unable to Expand/Contract these
structures.
To add or remove an Attachment Point, right-click on
an atom within the group and select the Group
> Attachment Point checkbox.
MarvinSketch allows you to specify that an atom in the molecule is a
radical. This functionality is available via the Atom
Pop-up Menu.
To change an atom into a radical,
right-click on it to access the Atom Pop-up Menu. Select the type of
radical from the Radicals
submenu. A radical symbol will appear next to the atom and a valence
check will be run with errors highlighted.
The JChem query guide provides more detailed information on how to use query structures created in MarvinSketch with JChem's query functionality. The following are some of the query building features available in MarvinSketch.
MarvinSketch allows you to specify R-groups within your molecule. These
R-groups can be very useful in R-group
queries. An R-group is a variable representing a
user-defined list of structures. Using R-groups in a query structure
can allow you to quickly search for a wide range of substructure hits
using only a single query.
You can set or change the R-group
label of a molecule node from the Atom
Pop-up Menu or by typing the corresponding R-group label on the keyboard.
To define the set of structures that are represented by an R-group label,
select the structures you wish to include. Then, select the
corresponding label from the Periodic
Table or use one of type the R-group label
on the keyboard. Set additional Occurence, RestH and If-then conditions for the query
in the R-logic dialog available from the Edit/Attributes menu.
MarvinSketch allows you to add Atom List query atoms to your molecule. An Atom List is a user-defined list of elements included in a query structure, any of which will produce a hit if found in the target.
You can add Atom Lists to your molecule through the Periodic Table. To add an Atom List to the molecule, select the Atom List button, then select the elements you wish to include in the list. Move the mouse into the canvas and click to add a query atom representing this atom list.
A Not List is a query atom that allows you to define a list of
elements that should not be included in the target structure. If an
atom within the query structure is set as a Not List, then the atom
in the same position within the target structure can be any atom that
is not on the list to produce a hit.
To add a Not List to the
molecule, select the Not
List button in the Periodic
Table, then select the elements you wish to include in
the list.
Move the mouse into the canvas and click to add a query atom representing
this not list.
Generic atoms can be added to include a wide range of elements in
a query structure. Currently, MarvinSketch supports two types of generic
atoms: Any
and Hetero
If an atom within the query structure is designated as "Any",
any atom at this position in the target structure will produce a hit.
If an atom within the query structure is designated as "Q",
then the atom at this position can be any heteroatom (i.e. any atom
except hydrogen or carbon) and it will produce a hit.
To add a
generic atom to the molecule, select one of the generic atom types
from the Periodic
Table and place it on the canvas with the mouse.
You can define the chemical neighborhood for an atom within a
query structure. MarvinSketch allows you to set properties, such as
hydrogen count, valence count, ring size, and aromaticity, which must
be matched by the corresponding atom in the target structure to
produce a hit.
To set or change atom properties, select an atom
property button from the Periodic
Table. To apply this property, click on the desired atom.
Copyright © 1998-2008 ChemAxon Ltd.