-
J. Järnström, M. Väisänen, R. Lehto, A. Jäsberg, J. Timonen,
and Peltonen J. Effect of latex on surface structure and
wetting of pigment coatings, Colloids and Surfaces A:
Physicochemical and Engineering Aspects, volume 353, pages
104-116, 2010
-
Petri Ihalainen, Kaj Backfolk, Petri Sirviö, and Jouko
Peltonen. Topographical, chemical, thermal and electrostatic
properties of latex films, Colloids and Surfaces A: Physicochem.
Eng. Aspects, volume 354, pages 320-330, 2010
-
Isabel Moutinho, Petri Ihalainen, Margarida Figueiredo, Jouko
Peltonen, and Paulo Ferreira. Evaluation of the topography of
surface sized eucalyptus based paper, Ind. Eng. Chem. Res.,
volume 49, pages 1-5, 2010
-
A. Tolkki, E. Vuorimaa, V. Chukharev, H. Lemmetyinen, P.
Ihalainen, J. Peltonen, V. Dehm, and F. Wurthner.
Langmuir-schaeffer films from a pii-pii stacking perylenediimide dye:
Organization and charge transfer properties, Langmuir, in press,
DOI: 10.1021/la903978y, 2010
-
M. Pykönen, K. Johansson, M. Dubreuil, D. Vangeneugden, G.
Ström, P. Fardim, and M. Toivakka. Evaluation of
plasma-deposited hydrophobic coatings on pigment-coated paper for
reduced dampening water absorption, Journal of Adhesion Science and
Technology, volume 24, pages 511-537, 2010
-
Maiju Pykönen, Kenth Johansson, Roger Bollström, Pedro Fardim,
and Martti Toivakka. Influence of surface chemical composition
on uv-varnish absorption into permeable pigment-coated paper,
Ind.Eng.Chem. Res., volume 49, pages 2169--2175, 2010
-
Parvez Alam and Martti Toivakka. Deflection and
plasticity of soft-tip beveled blades in paper coating operations,
Materials and Design, volume 30, pages 871-877, 2009
-
Parvez Alam, Thomas Byholm, Jani Kniivilä, Liisa Sinervo, and
Martti Toivakka. Calculating the permeability of model paper
coating structures comprising incongruent particle shapes and sizes,
Microporous and Mesoporous Materials, volume 117, number 3,
pages 685-688, 2009
-
Shaoxia Wang, Petri Ihalainen, Joakim Järnstöm, and Jouko
Peltonen. The effect of base paper and coating method on the
surface roughness of pigment coatings, J. Dispersion
Technology, volume 30, number 6, 2009
-
C.-M. Tåg, M. Pykönen, J.B. Rosenholm, and K.
Backfolk. Wettability of model fountain solutions: The
influence on topo-chemical and -physical properties of offset paper,
Journal of Colloid and Interface Science , volume 330, number
2, pages 428-436, 2009
-
Anders Sand, Martti Toivakka, and Tuomo Hjelt.
Influence of colloidal interactions on pigment coating layer structure
formation, Journal of Colloid and Interface Science, volume
332, pages 394-401, Jan, 2009
-
Jarkko J. Saarinen, Erik M Vartiainen, and Kai-Erik
Peiponen. Surface plasmon resonance reflectance from
nanoparticles in a liquid matrix: Retrieval of the optical properties
using the maximum entropy model, Sensors and Actuators B:
Chemical, volume 139, pages 383-395, 2009
-
Kai-Erik Peiponen and Jarkko J Saarinen. Generalized
kramerskronig relations in nonlinear optical- and thz-spectroscopy,
Reports on Progress in Physics, volume 72, pages 056401, 2009
-
Anders Sand, Tuija Nopola, Tuomo Hjelt, and Martti
Toivakka. A particle motion model for the study of
consolidation phenomena, Computers and Chemical Engineering,
volume 33, pages 1227-1239, 2009
-
T. Byholm, M. Toivakka, and J. Westerholm. Effective
packing of 3-dimensional voxel-based arbitrarily shaped particles,
Powder Technology, volume 196, pages 139-146, 2009
-
Anders Sand, Jani Kniivilä, Martti Toivakka, and Tuomo
Hjelt. Structure formation mechanisms in consolidating pigment
coating layers - simulation and visualisation, Computational
Materials Science (submitted), 2009
-
Joakim Järnström, Petri Ihalainen, Andreas Lemström, Martti
Toivakka, and Jouko Peltonen. The influence of different
roughness scales of pigment coated papers on print gloss, Nordic
Pulp and Paper Research Journal, volume 24, number 3, pages
327-334, 2009
-
Parvez Alam, Martti Toivakka, Roger Carlsson, Pekka Salminen,
and Stefan Sandås. Balancing between fold-crack resistance and
stiffness, Journal of Composite Materials, volume 43, number
11, pages 1265-1283, 2009
-
Roger Bollström, Anni Määttänen, Daniel Tobjörk, Petri
Ihalainen, Nikolai Kaihovirta, Ronald Österbacka, Jouko Peltonen, and
Martti Toivakka. A multilayer coated fiber-based substrate
suitable for printed functionality, Organic Electronics,
number 10, pages 10201023, Mar, 2009
-
Maiju Pykönen, Hanna Silvaani, Janet Preston, Pedro Fardim, and
Martti Toivakka. Plasma activation induced changes in surface
chemistry of pigment coating components, Colloids and Surfaces A:
Physicochemical and Engineering Aspects, volume 352, pages
103-112, 2009
-
H. Koivula, M. Juuti, D. W. Bousfield, J. Preston, R.
Silvennoinen, K.-E. Peiponen, and M. Toivakka. Comparison of
dynamic print gloss measurement techniques, TAPPI Journal,
volume 8, number 2, pages 19-28, 2009
-
Tuomas Näreoja, Anni Määttänen, Jouko Peltonen, Pekka E.
Hänninen, and Harri Härmä. Impact of surface defects and
denaturation of capture surface proteins on nonspecific binding in
immunoassays using antibody-coated polystyrene nanoparticle labels,
Journal of Immunological Methods, volume 347, pages 24-30,
2009
-
Sari Pihlasalo, Mika Hara, Pekka Hänninen, Peter Slotte, Jouko
Peltonen, and Harri Härmä. Liposome-based homogeneous
luminescence resonance energy transfer, Analytical
Biochemistry, volume 384, pages 231--237, 2009
-
Antti Valanne, Janne Suojanen, Jouko Peltonen, Tero Soukka,
Pekka Hänninen, and Harri Härmä. Multiple sized europium(iii)
chelate-dyed polystyrene particles as donors in fret an application for
sensitive protein quantification utilizing competitive adsorption,
The Analyst, volume 5, pages 980--986, 2009
-
H. Koivula, J. Preston, P. Heard, and M. Toivakka.
Visualisation of the distribution of offset ink components printed onto
coated paper, Colloids and Surfaces A: Physicochemical and
Engineering Aspects, volume 317 , number 1-3 , pages 557567 ,
March, 2008
-
Kaj Backfolk, Jouko Peltonen, Nick Triantafillopoulos, Serge
Lagerge, and Jarl Rosenholm. The influence of lubricating
agents on the formation of a film of a styrene/butadiene latex,
Tribology Letters, volume 29, pages 57--66, 2008
-
M. Pykönen, H. Sundqvist, O-V. Kaukoniemi, M. Tuominen, J.
Lahti, P. Fardim, and M. Toivakka. Ageing effect in
atmospheric plasma activation of paper substrates, Surface and
Coatings Technology, volume 202, pages 3777-3786, 2008
-
M. Pykönen, H. Sundqvist, M. Tuominen, J. Lahti, J. Preston, P.
Fardim, and M. Toivakka. Influence of atmospheric plasma
activation on sheet-fed offset print, Nordic Pulp and Paper
Research Journal, volume 23, number 2, pages 181-188, 2008
-
Anders Sand, Martti Toivakka, and Tuomo Hjelt.
Investigation of filtercake stability using numerical simulation
technique, TAPPI Journal, volume 7, number 2, pages 4-10, Feb,
2008
-
Anders Sand, Martti Toivakka, and Tuomo Hjelt.
Influence of drying strategy on coating layer structure formation,
Nordic Pulp & Paper Research Journal, volume 23, number 1,
pages 46-51, March, 2008
-
Anders Sand, Martti Toivakka, and Tuomo Hjelt. Small
particle mobility in consolidating coating layers, Nordic Pulp
& Paper Research Journal, volume 23, number 1, pages 52-56,
March, 2008
-
M. Siltanen, E. Vuorimaa, H. Lemmetyinen, P. Ihalainen, and J.
Peltonen. Nonliear optical and structural properties of
langmuir-blodgett films of thiohelicenebisquinones, Journal of
Physical Chemistry B, volume 112, pages 1940, 2008
-
M. Juuti, H. Koivula, M. Toivakka, and K.-E. Peiponen.
A diffractive gloss meter for local gloss measurements of papers and
print, Tappi Journal, volume 7, number 4, pages 27--32, 2008
-
H. Koivula, P.A.C. Gane, and M. Toivakka. Influence of
ink components on print rub, Nordic Pulp and Paper Research
Journal, volume 23, number 3, pages 277-284, 2008
-
Kaj Backfolk, Petri Sirviö, Petri Ihalainen, and Jouko
Peltonen. Thermal and topographical characterization of
polyester- and styrene/acrylate-based composite powders by scanning
probe microscopy, Thermochimica Acta, volume 470, pages 27-35,
2008
-
Xiaoxue Zhang, Mari Honkanen, Mikael Järn, Jouko Peltonen,
Viljami Pore, Erkki Levänen, and Tapio Mäntylä. Thermal
stability of the structural features in the superhydrophobic boehmite
films on austenitic stainless steels, Applied Surface Science,
volume 254, pages 5129-5133, 2008
-
Xiaoxue Zhang, Mikael Järn, Jouko Peltonen, Viljami Pore, Tommi
Vuorinen, Erkki Levänen, and Tapio Mäntylä. Analysis of
roughness parameters to specify superhydrophobic antireflective
boehmite films made by the sol-gel process, Journal of the European
Ceramic Society, accepted, 2008
-
Petri Ihalainen, Kaj Backfolk, Petri Sirviö, and Jouko
Peltonen. Thermal analysis and topographical characterization
of films of styrene-butadiene blends, Journal of Applied Polymer
Science, volume 109, pages 322-332, 2008
-
Joakim Järnström, Petri Ihalainen, Kaj Backfolk, and Jouko
Peltonen. Roughness of pigment coatings and its influence on
gloss, Applied Surface Science, volume 254, pages 5741-5749,
2008
-
Mari Raulio, Mikael Järn, Juhana Ahola, Jouko Peltonen, Jarl
Rosenholm, Sanna Tervakangas, Jukka Kolehmainen, Timo Ruokolainen,
Pekka Narko, and Mirja Salkinoja-Salonen. Microbe repelling
coated stainless steel analysed by field emission scanning electron
microscopy and physicochemical methods, Journal of Industrial
Microbiology & Biotechnology, accepted, 2008
-
Jie Chen, Adyary Fallarero, Anni Määttänen, Malena Sandberg,
Jouko Peltonen, Pia Vuorela, and Marja-Liisa Riekkola. Living
cells of staphylococcus aureus immobilized onto the capillary surface
in electrochromatography: A tool for screening of biofilms,
Analytical Chemistry, volume 80, number 13, pages 5103-5109,
May, 2008
-
Parvez Alam and Martti Toivakka. Micro-buckling of
paper during blade metering, Computers and Chemical
Engineering, volume 32, pages 600-607, 2008
-
K-E. Peiponen, V. Kontturi, I. Niskanen, M. Juuti, J. Räty, H.
Koivula, and M. Toivakka. On estimation of complex refractive
index and colour of dry black and cyan offset inks by a multi-function
spectrophotometer, Measurement Science and Technology, volume
19, number 11 , pages 115601, November, 2008
-
Parvez Alam, Martin Andell, and Dave Smedley.
Mechanical repair of timber beams fractured in flexure using bonded-in
reinforcements, Composites: Part B, 2008
-
Jarkko J. Saarinen, Sharon M. Weiss, Philippe M. Fauchet, and
J. E. Sipe. Reflectance analysis of a multilayer
one-dimensional porous silicon structure: Theory and experiment, J.
Appl. Phys., volume 104, pages 013103, 2008
-
M. Pykönen, H. Sundqvist, J. Järnström, O.-V. Kaukoniemi, M.
Tuominen, J. Lahti, J. Peltonen, P. Fardim, and M. Toivakka.
Effects of atmospheric plasma activation on properties of
pigment-coated and surface-sized papers, Applied Surface
Science, volume 255, pages 3217-3229, 2008
-
Jarkko J. Saarinen and J. E. Sipe. A green function
approach to surface optics in anisotropic media, J. Mod. Opt.,
volume 55, pages 13-32, 2008
-
Malena Sandberg, Anni Määttänen, Jouko Peltonen, Pia M.
Vuorela, and Fallarero Adyary. Automating a 96-well microtitre
plate model for staphylococcus aureus biofilms: An approach to
screening of natural antimicrobial compounds, International Journal
of Antimicrobial Agents, volume 32, pages 233--240, 2008
-
M. Juuti, T. Prykäri, E. Alarousu, H. Koivula, M. Myllys, A.
Lähteelä, M. Toivakka, J. Timonen, R. Myllylä, and K.-E.
Peiponen. Detection of local specular gloss and surface
roughness from black prints, Colloids and Surfaces A: Physicochem.
Eng. Aspects, volume 299, pages 101-108, 2007
-
I. Niskanen, J. Räty, K.-E. Peiponen, H. Koivula, and M.
Toivakka. Assessment of the complex refractive index of an
optically very dense solid layer: Case study offset magenta ink,
Chemical Physics Letters, volume 442, number 4-6, pages
515-517, 2007
-
Petri Ihalainen, Kaj Backfolk, Petri Sirviö, and Jouko
Peltonen. Thermal analysis and topographical characterization
of latex films by scanning probe microscopy, Journal of Applied
Physics, volume 101, number 4, pages 043505 1--, February, 2007
-
Kaj Backfolk, Rob Holmes, Petri Ihalainen, Petri Sirviö, Nick
Triantafillopoulos, and Jouko Peltonen. Determination of the
glass transition temperature of latex films: Comparison of various
methods, Polymer Testing, volume 26, pages 1031--1040, 2007
-
Carl-Mikael Tåg, Mikael Järn, Björn Granqvist, Joakim
Järnström, Jouko Peltonen, and Jarl Rosenholm. Influence of
surface structure on wetting of coated offset papers,
Holzforschung, volume 61, pages 516--522, 2007
-
P. Alam, M. Toivakka, K. Backfolk, and P. Sirviö.
Impact spreading and absorption of Newtonian droplets on
topographically irregular porous materials, Chemical Engineering
Science, volume 62, number 12, pages 3142-3158, 2007
-
J. Järnström, L. Sinervo, M. Toivakka, and J.
Peltonen. Topography and gloss of precipitated calcium
carbonate coating layers on a model substrate, TAPPI Journal,
volume 6, number 5, pages 23-31, May, 2007
-
R. Silvennoinen, M. Juuti, H. Koivula, M. Toivakka, and K.-E.
Peiponen. Diffractive glossmeter for measurement of dynamic
gloss of prints, TAGA Journal, volume 4, number 2, 2007
-
T. Byholm, M. Toivakka, and J. Westerholm. The
application of morphological algorithms on 3-dimensional porous
structures for identifying pores and gathering statistical data,
WSEAS Transactions on Information Science and Applications,
12, 2006
-
P. Alam, T. Byholm, and M. Toivakka. Calculating
tortuosity in quasi-random anisotropic packings, Nordic Pulp and
Paper Research Journal, volume 21, number 5, pages 670-675, 2006